Handheld C2H4 Ethylene Gas Detector LEGD-A10 is a portable device with built-in sampling pump having a flow rate of 1 L/min. It meets IP-66 standards which makes it suitable for use in harsh environmental conditions. Rapid speed of sampling, high flow rate, least detection time, compact design, plastic housing, storage space, etc. are some of the features which ensures accurate results in few minutes. It is used in chemical industry, food industry, etc.
| Sampling | With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection |
|---|---|
| Gas | Ethylene C2H4 |
| Measure Range | 0 to 1000 ppm |
| Resolution | 1ppm |
| Precision | 3 to 10% F.S. |
| Response Time | ≤ 10 s |
| Repeatability | ≤ ± 1% |
| Zero Shift | ≤ ± 1%（F.S./year） |
| Display | LCD dot matrix display |
| Temperature | -20°C to 50°C |
| Humidity | 0 to 95 % RH |
| Degree of Protection | IP-66 |
| Alarm | Sound, light, vibration |
| Recovery Time | ≤ 10 s |
| Linearity Error | ≤ ± 1% |
| Gas Unit | Units are switchable |
| Battery | 3.6 V 2300 mAh lithium polymer rechargeable battery<br/> operate time is about 12 h continuously<br/> charging time: 4 to 6 h |
| Operating Time | 100 h (pump off) |
| Dimensions | 205×75×32 mm |
| Weight | 300 g |
It is used to detect ethylene gas. Extensively used in brewing and fermentation industry, cold storage places, agricultural research, chemical labs, paper making industry, bio-pharmaceutical plant etc.
| Temperature | -20 to 50°C |
| Pressure | 0.9 to 1.1 (standard atmospheric pressure) |
| Humidity | 10 to 95 % RH (no dew condensation) |
| CO2 < 10 s |
| O2, flammable gases < 20 s |
| CO, H2S, SO2, NO, ClO2, NO2, H2 < 30 s |
| HCN, NH3, PH3 < 100 s |
| Temperature | -20 to 50°C |
| Pressure | 0.9 to 1.1 (standard atmospheric pressure) |
| Humidity | 10 to 95 % RH (no dew condensation) |
