Drug Stability Test Chamber LDST-A22 designed with 500 L internal capacity volume. It offers 20 to 98 % RH humidity range and temperature ranges from 0℃ to 100℃. Designed to simulate constant climatic conditions for testing a wide variety of pharmaceutical raw Drug material or finished Drug products for their quality, performance, shelf life and stability. It features conductive film located on the interior glass (of double layer 8 cm thick insulation glass) to prevent window frosting, built-in LED light for the work room lighting to clearly observe samples. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.
| Interior Volume | 500 L |
|---|---|
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Temperature Deviation in time | ± 2.0 ℃ |
| Temperature Fluctuation | ± 0.5 ℃ |
| Humidity Range | 20% to 98% RH |
| Humidity Deviation in time | ± 2.5% RH |
| Cooling Rate | 1 ℃ / min |
| Heating Rate | 3 ℃ / min |
| Cooling system | Mechanical compression refrigeration system |
| Refrigerating unit | French TECUMSEH compressor |
| Refrigerant | R404A, R23 |
| Heating Element | Nichrome heater |
| Controller | Programmable color LCD touch screen controller Ethernet connection, PC Link |
| Water supply system | Automatic water supply Water purification system |
| Humidifier | External isolation, stainless steel surface evaporation humidifier |
| Dehumidification | Evaporator |
| Temperature Sensor | PTR Platinum Resistance PT100 Ω/MV A-class, accuracy 0.001℃ |
| Humidity Sensor | Dry and wet bulb sensor |
| Build-in Water Tank | 270 × 300 × 450 mm |
| View Window Size | 300 × 330 mm |
| Air Circulation | Centrifugal wind fan |
| Exterior Material | Steel Plate with protective coating |
| Interior Material | SUS304 stainless steel |
| Thermal Insulation | Polyurethane foam and insulation cotton |
| Observation Window | Interior lighting, double-layer thermo stability silicone rubber sealing |
| Standard Configuration | 1 Cable hole (Φ 50,) with plug; 2 shelves |
| Maximum Noise | 65 dBA |
| Ambient Temperature | 5℃ to +35 ℃ |
| Relative Humidity | ≤ 85% RH |
| Internal dimension | 700 × 800 × 900 mm |
| External dimension | 1180 × 1350 × 2010 mm |
| Power Supply | 220 V, 50 Hz / 380 V, 50 Hz |
| Net weight | 515 kg |
| Gross weight | 550 kg |
Drug Stability Test Chamber is used in food industry also basic used in advanced research, Pharmaceutical Drug stability testing point, chemical industries, and including testing products relating to aerospace, electronics, automobile and environmental stress screening etc.
Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.
Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.
Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.
Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.
Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
