Ash Content Tester LACT-A10

Ash Content Tester LACT-A10 is the device composed of muffle furnace, temperature controller and electric heating plate. It is small size and needs less land with special fire-resistant material and heating components. The heating time is short and it has a long lifetime. It used to determine the ash in the range 0.001 to 0.180 mass %, from distillate and petroleum products.

  • Electric Muffle Furnace
    • Controlled temperature: 775 ±25 ℃
    • Temperature rising time of empty chamber: ≤ 50 min
    • Furnace temperature uniformity: ≤ 15℃
    • Internal dimension: 200 × 120 × 80 mm
    • External dimension: 490 × 490 × 450 mm
    • Power consumption: 2.5 kW
    • Power supply: AC 220V ±10%, 50 Hz
    • Net weight: 35 kg
    Temperature controller
    • Maximum control temperature: 1200 ℃
    • Dimension: 500 × 300 × 235 mm
    • Power consumption: 5000 W
    • Power supply: AC 220±10% V, 50Hz
    • Net weight: 5 kg
    Electric heating plate
    • Heating power: (1 to 6) grades, continuously adjustable
    • Temperature: 400℃
    • Diameter of heating plate: Φ 180 mm
    • Dimension: 280 × 250 × 90 mm
    • Power consumption: 2000 W
    • Power supply: AC 220±10%V, 50Hz
    • It is composed of muffle furnace, a temperature controller and electric heating plate
    • Muffle furnace adopts all-in-one structure
    • Equipped with special fire-resistant material and heating components
    • Adjustable LED and designed with temperature controller
    • The overshoot is small and temperature control is stable
    • Material used cold-roll steel sheet of outer shell furnace
    • Good anti-corrosion and long life time
  • Ash Content Tester is used to determine the ash in the range 0.001 to 0.180 mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants.

  • Accessories No. Name Qty
    1 Main unit 1 set
    2 Temperature controller 1 set
    3 Hot plate 1 set
    4 Thermocouple 1 piece
    5 Compensation lead wire 1 piece
    6 Porcelain crucible (50ml) 10 piece
    7 Porcelain crucible (100ml) 10 piece
    8 Crucible tong 1 piece
    9 Fuse 2 piece

Portable Octane Number and Cetane Meter LOCT-A20

  • motor gasoline and dieselMeasurement item
  • 40 to 120measurement unit of octane is ON
  • ± 0.5 maxPermissible error of octane
  • ± 0.2 maxFluctuate range of octane

Octane Number and Cetane Number Tester LOCT-A10

  • 86.0 to 105.0/MON Measuring Range For Aviation Gasoline
  • National standard: 65.0 to 110.0/RON
    National-V standard: 70 to 115.0/RON
    Blended gasoline: 75.0 to 120.0/RON
    Light gasoline: 50.0 to 85.0 /MON
    Isomerized gasoline: 85.0 to 120.0/RON
    Arene gasoline: 90.0 to 120.0/RON
     Measuring Range For Gasoline For Motor Vehicles
  • E93: 92.0 to 95.0/RON
    E97: 95.0 to 99.0/RON
    Judgement: 60.0 to 120.0/RON
     Measuring Range For Ethanol
  • Cetane number: 25 to 75/CN
    Cetane index: 20 to 80/CI
    Measuring Range For Automobile Diesel Fuels
Constant Temperature Needle Penetration Tester LTNP-A10
  • 0 to 700 taper degree (digital display table 0-70 mm)Measuring range
  • Timing error is less than ±0.1 sTiming device
  • 0.01 mm Resolution
  • ±1 cone insertion degreeNeedle insertion accuracy
Mercaptan Sulfur Tester LMST-A10
  • (0 to ±1999.5) MvPotential measuring range
  • 0.1 % ±0.5 mVIntrinsic error
  • Ri ≥1 × 1012 ΩInput impedance
  • 10 mLBurette capacity

Automatic Softening Point Tester LSPT-A10

  • 32 ℃ to 160 ℃Measurement range
  • 35 °CAmbient temperature
  • 0.01 ℃Temperature resolution
  • 1000 mLBeaker volume

Automatic Thermogravimetric Analyzer LTGA-A10

  • Room temperature to 1000 ºC Temperature range
  • 0.1 ºCTemperature resolution
  • ±0.1 ºCTemperature fluctuation
  • 1 ~ 80 ºC / minHeating rate