Bench top Turbidity Meter LTM-B10

Name: Bench top Turbidity Meter LTM-B10
Brand: Labtron.best
SKU: LTM-B10
Rating: 4.9 (735 reviews)

Bench top turbidity meter LTM-B10 with microprocessor controlled system, works on 90° scattered light principle to measure water turbidity in nephelometric turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. This turbidity meter delivers highly accurate results with better numerical calculations to meet GLP standards.

Name

Company Name

Product

Message

Captcha

Refersh

Measuring range (NTU)	0 to 100
Minimum readout value (NTU)	0.01, 0.1
Calibration point	1
Sample volume	5 to 10 ml
Principle method	90° scattered light
Operating temperature	5 to 40°C
Working temperature	5 to 40°C
Light source	Infrared-emitting diode (850 nm λ)
Detector	Silicon photodiode
Error value	± 6 % (± 2 % F.S)
Zero drift	± 0.5 % F.S.
Reset functions	Yes
Memory	Stores up to 20 sets data
Output
Dimension	400 × 300 × 250 mm
Weight	2.5 kg
Power batteries	DC 1.5 V, 5 AA alkaline batteries
Power supply	AC 220 V, 50 Hz

- Quick and automatic multi-points calibration
- Back light LCD display with touch keypad
- Wide measurement range
- Non- linear data processing and transfer
- Selectable automatic or manual switch mode
- High through put stability
- Auto power off function
- Easy to operate
Used in water treatment plants, swimming pool, water recycling units, research and quality laboratories of pharmacy, life science, food, and beverage industry.

Accessory No.	Name	Quantity
1	Specimen bottle	3 pcs
2	400 NTU (Formazine) turbidity standard solution	1 bottle
3	Power cable	1 pc

Accessory No. Name

1 USB communication interface
Bench top Turbidity Meter LTM-B10

Related Products of Turbidity Meter

Portable Turbidity Meter LTM-A15

0 to 100, 100 to 1000Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
7Calibration point
5 to 10 mlSample volume

Portable turbidity meter LTM-A16

LED/860 nm (Wavelength)Light source
LCDReadings display
NTU, FTU, EBC, ASBCUnit switches
0.00-20.0; 20.01-200; 200.01-1000 NTUMeasurement range

Bench top Turbidity Meter (with built-in printer) LTM-C10

0 to 100, 0 to 200Measuring range (NTU)
0.01Minimum readout value (NTU)
2Calibration point
18 to 20 mlSample volume

Bench top Turbidity Meter LTM-B13

0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
5Calibration point
5 to 10 mlSample volume

Portable Turbidity Meter LTM-A13

0 to 100, 100 to 500Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
6Calibration point
5 to 10 mlSample volume

Portable Turbidity Meter LTM-A10

0 to 200Measuring range (NTU)
0.1Minimum readout value (NTU)
NilCalibration point
5 to 10 mlSample volume

Bench top Turbidity Meter (with built-in printer) LTM-C11

0 to 100, 0 to 200, 0 to 500Measuring range (NTU)
0.01Minimum readout value (NTU)
3Calibration point
18 to 20 mlSample volume

Bench top Turbidity Meter LTM-B12

0 to 50, 0 to 100, 0 to 200, 0 to 400Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
4Calibration point
5 to 10 mlSample volume

Portable Turbidity Meter LTM-A11

0 to 100, 0 to 200Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
4Calibration point
5 to 10 mlSample volume

Portable Turbidity Meter LTM-A12

0 to 100, 100 to 400Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
5Calibration point
5 to 10 mlSample volume

Bench top Turbidity Meter (with built-in printer) LTM-C13

0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000Measuring range (NTU)
0.01Minimum readout value (NTU)
5Calibration point
18 to 20 mlSample volume

Bench top Turbidity Meter LTM-B11

0 to 50, 0 to 100, 0 to 200Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
3Calibration point
5 to 10 mlSample volume

Bench top Turbidity Meter LTM-B14

0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800, 0 to 1000Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
6Calibration point
5 to 10 mlSample volume

Bench top Turbidity Meter (with built-in printer) LTM-C14

0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000Measuring range (NTU)
0.001Minimum readout value (NTU)
5Calibration point
18 to 20 mlSample volume

Portable Turbidity Meter LTM-A14

0 to 100, 100 to 800Measuring range (NTU)
0.01, 0.1Minimum readout value (NTU)
6Calibration point
5 to 10 mlSample volume

pH Meter (Benchtop)

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop pH Meter LBPM-B11

0 to 100°C, 32°F to 212°F Manual or AutomaticTemperature compensation
Manual or automatic endpoint detectionHold function
Standard or High-accuracyStability criteria
10, 30, 60 seconds, 10, 30 minutes or OffInterval readings

Benchtop pH meter LBPM-A11

0.00 to 14.00 pHpH measurement range
± 0.01 pHpH accuracy
0.01 pHpH resolution
2 pointsCalibration points

Benchtop pH meter LBPM-A20

-1.00 to 15.00 pHpH measurement range
± 0.01 pHpH accuracy
0.01 pHpH resolution
1-3 pointsCalibration points

Benchtop Ion Meter

Benchtop Ion meter for Na, LBIM-A12

Na range: 1 × 10⁵ - 1 M, 0.1 - 23000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for F, LBIM-A11

F range: 1 × 10⁶M – saturation, 0.02 ppm to saturationIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cl, LBIM-A10

Cl range: 5 × 10⁶ - 1 M, 1.8 - 35500 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A11

{"COD determination range":"5 to 5000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 30 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"20 pcs","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 10 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

Multi parameter water quality analyzer LMWA-A10

{"COD determination range":"2 to 10000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 60 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 20 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

TSS Meter

TSS Meter LTSS-A10

20000 mg/L
0.01 mg/L ~ 45000 mg/L
0.01 mg/L ~ 120000 mg/LMeasurement range
± 2 % F.S. of its range ( Depending on the homogeneity of sludge)Measurement accuracy
≤ 0.4 MpaPressure range
≤ 2.5 m/s, 8.2 ft./sFlow rate

ORP Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket ORP tester LPOT-A11

BNCConnector
(-999) to 999 mVORP measurement range
± 2 mVORP accuracy
1 mVORP resolution

Pocket ORP tester LPOT-A10

Platinum sensorSensor type
6 pinConnector
(-999) to 999 mVORP measurement range
± 2 mVORP accuracy

Accessory No.	Name
1	USB communication interface