Type II Water Purification System LTWP -A13 is a 80 L capacited modular design which meets the needs of basic laboratory water purifier. It provides Type II level water with consistency and reliability with a TOC level of < 20 ppb. Remove approximately 98% of inorganic ions and 99% of all dissolved organic substances.This system produce and reject water at the same time. Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance.
| Output of Pure water | ≥ 40 L / hr. |
|---|---|
| Process | Single Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 80 L |
| Configuration | Floor Standing |
| Output of Ultrapure water | ≥ 1- 1.5 L / min |
| Resistivity at 25 °C | 10-16 M Ω. cm |
| Conductivity at 25 °C | ≤ 10 µs / cm |
| TOC | < 20 ppb |
| Absorbance ( 254 nm ) | ≤ 0.001 |
| Reactive Silica ( SiO2 ) | < 0.01 ppm |
| Heavy metal | < 0.01 ppm |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 200 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 35 kg |
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
